
Kabel subwoofera C3550W 5,0 m
Wysokiej jakości kabel RCA


With a 24 liter volume and nearly 14 kg, this active subwoofer is perfectly equipped to deliver extra depth and punch to home cinema and music.
The slender form takes up very little space, yet accommodates a downward radiating 200 mm woofer - the secret to this subwoofer's performance which is miles above its price class. The low end is 40 Hz (-3 dB). Thanks to an integrated amplifier with 100 watts, the bass has a dynamic and precise sound. An internal limiter protects the drivers from overmodulation and distortion.
A mono cinch connection for connecting to a home cinema A/V receiver and phase switch are located on the back.
An auto level switch with three levels ensures the optimal alignment to the various output levels from different home cinema A/V receivers. This ensures that the subwoofer always springs into action when a signal is available.
The attractive yet discreet form is accented by high gloss elements and rounded corners. The downfire principle, bass reflex vent on the bottom, and angled, embedded power plugs allow the US 2108/1 SW to be positioned directly against the wall. Four resonance damping feet ensure stable placement and uncouple the subwoofer from the floor.
The US 2108/1 SW is only available as part of a Teufel set.
| Opis | Produkt |
|---|---|
| Szerokość | 28 cm |
| Wysokość | 50 cm |
| Głębokość | 28 cm |
| Waga | 13,6 kg |
| Opis | Produkt |
|---|---|
| Wejścia cinch | 1 |
| Opis | Produkt |
|---|---|
| Napięcie zasilania | 230 V AC / 50 Hz V |
| Automatyczne włączanie/wyłączanie | Tak |
| Maksymalny pobór mocy | 250 W |
| Kabel - konektor IEC | tak |
| Klasa ochronności | 2 |
| Bezpiecznik | tak |
| Przechowywanie ustawień po odłaczeniu | tak |
| Funkcja standby | tak |
| Pobór mocy w trybie standby | 0,5 W |
| Bass boost/EQ | tak |
| Regulator poziomu wejściowego | tak |
| Regulacja poziomu | tak |
| Regulacja fazy | 0 / 180° |
| Moc wyjściowa sinus (RMS) Bass | 100 W |
| Moc wyjściowa impulsowa (szczyt) Bass | 120 W |
| Konfiguracja wzmacniacza | 1.0 |
| Technologia wzmacniacza | Class D |
| Kanały wzmacniacza | 1 |
| Opis | Produkt |
|---|---|
| Najniższa częstotliwość (-3 dB) | 40 Hz |
| Przystosowany do amplitunera | tak |
| Otwory kompensujące (pozycja) | Dolne |
| Otwory kompensujące | 1 |
| Średnica otowrów na śruby | 6 mm |
| Materiał obudowy | MDF |
| Powierzchnia obudowy | High gloss (front), foil (corpus) |
| Ochrona magnetyczna | tak |
| Pojemność wewnętrzna netto | 24 L |
| Zintegrowany stojak | tak |
| Głośnik niskotonowy (ilość w obudowie) | 1 |
| Głośnik niskotonowy (średnica) | 200 mm |
| Głośnik niskotonowy (materiał) | Celuloza |
| Moc ciągła (IEC - Long Term) | 100 W |
| Czułość (2.83 V / 1 m) | 87 dB |
| Zakres częstotliwości od/do | 40 - 250 Hz |
| Szczytowa moc znamionowa (IEC - Short Term) | 250 W |
| Maksymalny poziom ciśnienia akustycznego | 109 dB/1m |
| Układ głośników | Jednodrożny |
| Konstrukcja obudowy | Bass reflex |
Niezbędne akcesoria są zawarte w zestawie.